now in your cart
Air Conditioning & Refrigeration->
Air Flow Meters
Cable Testers & Tracers
Carbon Monoxide Detectors
Circuit Breaker & Fuse Finders
Combustion & Heating
Current Leakage Clamp Meters
Ductor Test Equipment
Electrical Test Equipment
EMF & RF Test Equipment
Food Test Equipment
Ground Resistance Testers
Hipot Test Equipment
HV Test Equipment
HVAC Field Test Kits
Insulation Resistance Testers->
LAN Test Equipment
Light and Sound Meters
Loop Impedance Testers
Microwave Leakage Detectors
Power Quality Analysers
Solar PV Test Equipment
Test and Tag Equipment
Thermal Imaging Cameras
Video Inspection Cameras
Other Test Equipment
Subscribe to our newsletter for periodic updates and valuable coupons.
View previous campaigns.
Filter Results by:
Items starting with ...
DIGITAL RCD TESTER
A professional certified digital RCD Tester, which accurately tests the correct operation of RCDs (Residual Current Devices). It is a requirement to test and verify the correct operation of these devices, and this tester does exactly that. It is small enough to fit in a tool bag and is essential for testing the correct operation of a safety trip device. This tester has a fully programmed operation, making it extremely easy to use and it will also test the latest delay action breakers, as...
DIGITAL RCD TESTER WITH AUTO RAMP FUNCTION
The T950 is a standalone RCD tester, specifically designed to test the operation of Residual Current Devices (RCDs). This unit will test 10mA, 20mA, 30mA, 100mA, 300mA, and 500mA RCD trip currents, and also tests trip times to a resolution of 1ms. Display LED's will check the status of the wiring and light up to verify that phase to earth and phase to neutral are correctly connected. A proceed light will also alert the user that it is safe to perform the RCD testing procedure. There are a...
SONEL MPI-502 COMBINATION LOOP IMPEDANCE & RCD TESTER
The MPI-502 from Sonel is a multifunction earth loop impedance and RCD tester combination in one compact unit, making it possible to test both loop impedance and RCD trip time and current without the need for separate instruments. Housed in the same ergonomic case as the MZC-304 loop impedance tester and the MRP-201 RCD tester, the MPI-502 offers the combined functions of these meters in one hand held, easy to operate instrument. The user can test earth loop impedance up to 2000 Ohms over...
... more info
SONEL MPI-505 MULTIFUNCTION INSTALLATION TESTER
The Sonel MPI-505 is a multifunction installation tester - an all in one insulation, loop and RCD tester. One instrument allows the user to measure insulation resistance, earth loop impedance and prospective short current (PSC) and test RCD operation on an electrical cicuit. The MPI-505 is one of the smallest and lightest multifunction meters available and has a groundbreaking ergonomic design with a CAT IV 300V safety rating. The insulation resistance measurements are carried out...
... more info
SONEL MPI-508 MULTIFUNCTION INSULATION LOOP & RCD TESTER WITH SOFTWARE
The MPI-508 is the latest advanced multifunction installation tester from Sonel available at a ground-breaking price. The Sonel MPI-508 can perform testing and diagnosis of an electrical circuit and is designed to undertake loop measurements without tripping the RCD, insulation resistance measurements and RCD testing. Additionally, the MPI-508 can measure continuity, phase sequence/rotation and additionally offers measurement and logging of AC voltage, current, frequency and power. The MPI-508...
SONEL MPI-520 MULTIFUNCTION INSULATION LOOP & RCD TESTER WITH POWER FUNCTION
The Sonel MPI-520 is an advanced multifunction insulation, loop impedance and RCD installation tester, designed for use in verifying electrical installations. The MPI-520 allows the user to perform both power tests (including active, reactive and apparent power) as well as power factor, which enables the user to monitor the quality of the power, which can be useful in determining consumption costs, with the use of the optional clamp adapter. The Sonel MPI-520 can perform advanced testing and...
... more info
SEW 1813EL MICROPROCESSOR CONTROL MENU DRIVEN DIGITAL RCD TESTER
This unit is the 1813EL from SEW and is a microprocessor controlled RCD tester. It has a menu driven interface, which makes using it extremely easy, as the intuitive menu system will guide the user through the setup and test procedure to make sure that the testing is performed correctly each time. The 1813EL can test the disconnection time of an RCD, and the disconnection current, as verification that a safety device trips within a rated time is essential to comly with the relevant...
DIGITAL INDUSTRIAL RCD TESTER WITH MICROPROCESSOR CONTROL
The 1811EL is an industrial RCD tester, which benefits from having smart microprocessor control. This instrument operates between line and earth, making it suitable for industrial use in electrical installations where a neutral is not present or where connection to a neutral conductor is not possible. Each phase in a three phase system can be tested independently to verify RCD / circuit breaker tripping time and tripping current. This unit works by either measuring tripping sensitivity...
SONEL MPI-530 MULTIFUNCTION INSULATION, LOOP, RCD, GROUND RESISTANCE & POWER TESTER
The Sonel MPI-530 is an advanced multifunction insulation, loop impedance, RCD, ground resistance, lux (light level), phase and motor rotation and power/harmonics tester, designed for use in verifying a wide range pf parameters in various electrical networks of various voltages and configurations. The MPI-530 allows the user to measure and log power parameters, including active, reactive, and apparent power, Cos Phi, power factor, harmonics and total harmonic distortion. These...
... more info
THREE PHASE RCD /ELCB & PHASE ROTATION INDICATOR
This instrument is an industrial three phase RCD / ELCB tester, combined with a three phase presence indicator and phase rotation indicator. The RCD / ELCB function can be utilized on a three phase powered system (up to 550V phase to phase) with a protective earth system, or a single phase powered system (up to 317V phase to earth). When being used on a three phase system, this instrument acts as a phase rotation indicator, and will light up it's three indicator lights to verify...
HT ITALIA MULTITEST M73 TRMS MULTIMETER WITH INTEGRATED RCD & LOOP TESTER
The M73 from HT Italia is a combination RCD and earth loop tester, and is one of four models of new MULTITEST family of portable meters, which also include the M72, M74 and M75 meters, designed to perform Earth Resistance measurements and trip out time test on RCD's type according to VDE and IEC common standards on typical urban electrical installations. The M73 meter also include others features as phase sequence with 1 wire method, leakage current with optional transducer clamp and...
SONEL MRP-201 RCD TESTER WITH AUTO TEST AND AUTO RAMP FUNCTION
The MRP -201 from Sonel is an advanced RCD tester, able to test the operation of AC, A and B types of RCD’s. The MRP -201 has the capability to test general short delay and selective RCD’s for the rated current values of 10 mA, 30 mA, 100 mA, 300 mA and 500 mA with simultaneous measurement of tripping current IA and tripping time tA for currents 0.5 (non-trip), 1, 2 and 5 times rated RCD nominal current. In addition, the MRP-201 has the ability to measure touch...
... more info
HT ITALIA SPEED418 RCD & LOOP TESTER WITH NON-TRIP FUNCTION
The HT Italia SPEED418 is an innovative meter designed to perform testing without RCDs' tripping directly on sockets and all RCDs. Trip out time and trip out current tests with automatic and manual modes on electrical installations in compliance to recent standards are possible. The SPEED418 also performs loop impedance measurements with a high resolution of 0.1mOhm (with IMP57 optional accessory). The meter is very easy to use and thanks to newest electronic function selector it has an...
... more info
CHAUVIN ARNOUX CA6030 DIGITAL RCD/LOOP PSC TESTER
The CA 6030 from Chauvin Arnoux is a professional quality RCD and earth loop tester, which can measure power on earth measurements by way of the RCD test with ot without RCD tripping (utilising one auxiliary rod). In addition, the CA6030 is also capable of performing phase rotation tesing, using 3 wires (conventional method) or 2 wires (sequential method) This device is an innovative and easy to use new generation tester, for optimum testing to AS/NZS and international...
... more info
Shipping & Returns
Conditions of Use
Copyright © 2013