Shopping Cart

0 item $0.00

My Cart -

0 item
Categories
 

Kyoritsu 6010A 4 in 1 Multifunction Tester

Availability: In stock

The Kyoritsu 6010A is a 4 in 1 Digital Multifunction Tester capable of continuity, insulation, loop and RCD testing. The 6010A features an easy to use handheld design with ability to measure V, Ω, MΩ, Hz, A (mA) and also a large dual display with bright backlight and bargraph....

Availability: In stock

$1,380.00
Qty:

The Kyoritsu 6010A is a 4 in 1 Digital Multifunction Tester capable of continuity, insulation, loop and RCD testing. The 6010A features an easy to use handheld design with the ability to measure V, Ω, MΩ, Hz, A (mA) and also a large dual display with bright backlight and bargraph.

The Kyoritsu 6010A is an advanced multifunction meter that can perform continuity testing up to 200Ω with a short circuit currnet up to 200mA DC. Insulation resistance can also be measured up to 200MΩ with a 500 V DC test voltage. The 6010A integrates several safety features including a live circuit warning LED to indicate the circuit under test is live as well as integral overload protection on interal continuity and insulation test circuitry.

In addition, the Kyoritsu 6010A can perform loop and RCD testing. This includes low current loop impedance testing which helps to prevent the tripping of passive RCDs. Supply voltage can be displayed in loop impedance mode and LED indicators highlight if the wiring of the connected circuit under test is correct. The 6010A also incorporates an auto data hold function, to retain measured readings for a set period after testing and a phase angle selection module, to select the test current from the positive or half cycle of the waveform which can prevent RCD tripping.

The Kyoritsu 6010A is supplied with test leads, case, shoulder strap and batteries.

Key Features:

  • 4 in 1 Tester - Continuity, Insulation, Loop and RCD Testing. 
  • Live circuit warning LED: Immediate illumination of a warning lamp if the circuit under test is live. 
  • 500V DC test voltage for insulation tests. 
  • 200mA short circuit current on continuity ranges. 
  • Wiring connection check LED’s: Immediate indication if wiring of circuit under test is correct (Loop & RCD).
  • Low Current Loop Impedance Test: Short duration low test current will prevent tripping of many passive RCDs. 
  • Auto Data Hold: Retains displayed reading for set period following test.
  • Phase Angle Selection: Selection of test current from +ve or -ve half cycle of waveform can prevent tripping of polarized type RCDs. 

 

Specifications:

 

Download Attachment
pdf6010A Datasheet (450.25 KB )

How do you rate this product?

  1 star 2 stars 3 stars 4 stars 5 stars
Value
Quality
Price

Write your own review