|6016 Datasheet (1.5 MB )|
The Kyoritsu 6016 is an advanced 10 in 1 Digital Multifunction Tester with the capabilities of testing loop impedance, continuity, insulation, RCD, PSC, PFC, earth resistance, AC voltage and phase rotation. Designed to comprehensively test and verify the safety of electrical installations, the 6016 can save and display up to 1000 data results in its internal memory which can be transferred to the supplied PC software in order to generate reports.
The Kyrotisu 6016 has the ability to perform continuity measurements up to 2000Ω. This can be carried out via the test button lockdown feature which allows for continuous testing. An instantaneous indication of the continuity is given by the selectable buzzer and live circuit warnings are outlined by a flashing LED and buzzer, as well as on the display.
Insulation resistance can be tested across three voltage ranges (250V, 500V and 1000V) up to 2000MΩ using the 6016. The instrument features an auto-discharge function to ensure circuits are not hazardous after testing and live circuits are also present in the form of an LED, buzzer and on-screen indications. AC voltages can additionally be measured by the Kyoritsu 6016 and the ability to display the frequency of that voltage under test.
Loop impedance can also be tested quickly using the Kyoritsu 6016. With the low current loop impedance feature enabled, high accuracy loop measurements (up to 0.01Ω) can be achieved without tripping RCDs. Alternatively, greater accuracies can be provided using the higher current function. In addition, the 6016 also automatically calculates both the prospective short currrent (PSC) and prospective fault current (PFC) as well as providing the ability to test phase to phase loops.
The Kyoristu 6016 provides comprehensive RCD testing for RCD type A (pulsating direct currents), RCD type AC (alternating currents), general and selective RCDs (delayed). Measurements can be at 0.5, 1 and 5 times the rated nominal RCD current. Featuring both autotest and ramp functions, the 6016 has selectable touch voltage (25V and 50V) to suit the application.
Furthermore, the 6016 can be utilised to measure both earth resistance and three phase rotation. Earth resistance can be measured up to 2000Ω. This can be undertaken using the volt-ampere method without an external power source and with the supplied auxiliary spikes. The 6016 can be applied to measure the phase rotation of three phase lines with clear indication of the sequence on the LCD display.
The Kyoritsu 6016 is supplied with carry case, test leads, auxiliary spikes and software.
Supplied with carry case, test leads, auxiliary spikes and software.
Continuous testing can be carried out by use of the test button lockdown feature. A selectable buzzer gives instantaneous indication of continuity. Null facility eliminates the test lead resistance from the results, the nulled value is retained even if the instrument is switched off. Live circuit warnings are given by a flashing LED, buzzer and indication on the display.
Three selectable test voltages 250V, 500V and 1000V. An auto-discharge function ensures that circuits are not hazardous after testing. A red LED gives warning of high voltage output during testing and discharging of the circuit. In case of connecting to a live circuit, a live circuit warning is given by flashing LED, buzzer and indication on the display.
Loop Impedance Measurement
A patented (ATT) low current loop impedance test enables high accuracy loop measurements and quick testing without tripping RCD's. A high current alternative is selectable for even higher accuracy and instantaneous results. The subsequent test will default to the low current test, this saves any inadvertent tripping of the RCD. The KEW 6016 allows also for phase to phase loop tests.
PSC / PFC Measurement
The Prospective Short Circuit Current (PSC) and Prospective Fault Current (PFC) are automatically calculated and shown on the display. As loop testing, the function has low and high test current options with the default to low current to avoid inadvertent tripping of RCDs.
The Kyoritsu 6016 has a comprehensive RCD test feature for RCD type AC (Alternative Currents), RCD type A (Pulsating Direct Currents), General and Selective (delayed). Measures at 1/2x, 1x, 5x of nominal RCD current. It also has Ramp Test and Auto test where all results are shown on one screen. Touch voltage limit can be selected for 25V or 50V depending on application.
Using the classical Volt-Ampere method with two auxiliary earth spikes and without external power source. All test leads and spikes are supplied as standard accessories.
Kyoritsu 6016 can check the phase rotation of three phase lines with clear indication of the sequence on the display.
In addition to the voltage measurement, this function gives also the frequency of the voltage under test.
|6016 Datasheet (1.5 MB )|
Test Equipment has always been proud of being one of the most progressive specialist suppliers of test and measurement equipment. Australian owned and operated by experienced engineers, we offer extensive product and application knowledge as well as quality service, which translates into a seamless experience when you procure your test and measurement instruments from us.
We started as a small business, fueled by the knowledge that we could make a positive impact and have come a long way since our inception, growing a small range of products into a full range of hundreds of products from some of the most respected brands in the industry such as AEMC, FLIR Systems, Kyoritsu, Megger and Testrix Systems. We now cater for a massive number of clientele from all types of industries including electrical contractors, utility companies, engineering businesses and large corporations as well as a large number of local, and state government departments. We now serve the whole of Australia with various instrumentation including cable & pipe locators, drain, sewer & pipe inspection cameras, ground penetrating radar, thermal imaging equipment, power quality equipment and a whole range of industrial test instruments such as low resistance testers, insulation resistance testers and ground resistance testers.
At Test Equipment, we have a wide variety of payment options for ease of purchasing, including ZIP PAY, EFTPOS and bank deposit and we offer fast courier shipping to all parts of Australia because we understand that time is money.
Browse through our website, or search online for the product you need, or feel free to call us if you need any help or advice.