Part of Megger's MIT200 series, the MIT210 is a pocket-sized meter, capable of testing insulation to 1000MΩ and continuity testing at 200mA, down to 0.01Ω . The MIT210 offers a combination of digital readout and analog display, as well as a variety of safety and operational features making it ideal for testing transformers, motors, generators switchgear, panel building, domestic appliances, power tools etc., as well as fixed electrical wiring systems.
The Megger MIT210 features both the test insulation and continuity. Insulation can be tested up to 1000 MΩ across a 1000V range, whilst auto discharge ensures all circuits are safely discharged after testing. This model is auto ranging and provides a variety of safety features, in compliance with IEC 61010 and EN6155. For example, circuits in excess of 25 V will generate a voltage warning and, for circuits over 50 V, the MIT210 will inhibit testing of the insulation, protecting the operator and the instrument from injury or damage. As this unit features a 1000V test range, it will additionally provide a high voltage warning prior to the test voltage being applied.
The MIT210 model also provides automatic continuity testing, performed at 200 mA. There is no need to press any test buttons and therefore leaves the operator "hands free". The continuity range has 0.01Ω resolution and a short circuit current in excess of 200 mA, which can measure continuity up to 100Ω. The MIT210 features test lead zero to compensate for test lead resistance and also a continuity buzzer, with a threshold of 2Ω.

MIT210 Range
The MIT210's display offers a combination of digital readout and analog display, using Megger’s patented DART display technology, which includes clear LCD readings with an analog pointer response for evaluating circuit charge and discharge characteristics. Housed in tough ABS, the MIT210 is designed to withstand industrial use, whilst being compact enough to fit into a pocket. This model is also battery operated, either with 6 AA alkaline batteries or a nickel metal hydride (NiMH) rechargeable type. A low battery warning indicator gives advanced warning of exhausted batteries and a calibration certificate is also provided.
Features
Meets the international EN61557 requirements of the rated test voltage into a 1 mA load.
Insulation measurement up to 1000 MΩ (1000V range).
Digital display of insulation measurement on a logarithmic analogue arc and a digital display.
Continuity range has 0.01 Ω resolution and a short circuit current in excess of 200 mA.
Automatic continuity testing (no need to press the test button).
CAT III 600V rated.
Automatic power-off.
Automatic voltage detection avoids accidental contact with live circuits.
Test lead zero allows compensation for test lead resistance.
Continuity buzzer range operates at <2 Ω.
Calibration certificate provided.
Specifications
