Quoted figures are a guide only and subject to finance approval
|Calculator||12 M||24 M||36 M||48 M|
The Radiodetection RD8100PDLM offers a further enhancement on the RD8100PXLM, by the addition of a number of extra features, designed to make precision underground locates fast, accurate and easy. With 18 active frequencies, ranging from an ultra low frequency of 128Hz up to a ultra high 200kHz frequency, the RD8100PDLM gives the operator the widest range of available locate frequencies, for identification of multiple buried utilities. With enhanced features, such as current direction (CD), which can be used to identify a single cable or pipe from measuring the direction of the locate signal, and fault find, which allows the RD8100PDLM to be connected to an A-Frame for pinpointing current leakage faults, caused by damaged underground cables or pipe surfaces, the RD8100PDLM is a precision underground locator aimed at a wide range of industries and applications. Depth in power mode allows the RD8100PDLM to display the depth estimation of a live, load carrying cable without utilising the signal transmitter to apply a signal, making fast and easy location of live cable depth a reality. Four passive frequencies (power, radio, CATV and CPS) make the RD8100PDLM a flexible locator when being used without a signal generator, and optional data logging and GPS allow the user to save survey results for reporting or training / audit purposes. The transponder, built into the RD8100PDLM can detect buried utility RF markers, making them suitable for use across a range of industries. Combined mode allows for scanning of buried cables, pipes and RF utility markers all at the same time, reducing survey time and offering a more simplistic user experience. Radiodetection's unique automatic depth estimation provides measurements when the locator is within close proximity of a RF marker. Rechargeable Li-Ion batteries are standard across all of the RD8100 marker locators, and all are equipped with Bluetooth and iLOC connectivity for remote control of key transmitter functions.
The TX1 is an easy to use, entry level transmitter. The family of Radiodetection transmitters supports the entire range of Radiodetection cable and pipe locators. All models feature a three stage phase sensitive amplifier that delivers a ground impedance compensated and constant current across its entire bandwidth in direct, connect, clamp or inductive modes. The range is designed to deliver superior performance using minimal power consumption in a lightweight and well balanced format. Multimeter function provides measurement of output voltage, line voltage, current, impedance and power.
The Tx-1 1 watt transmitter is an easy to use, entry-level, transmitter from Radiodetection. Based on a fully digital platform, the Tx family of Radiodetection transmitters supports the entire range of RD7100 and RD8100 cable and pipe locators. The Tx-1 is an easy to use, entry-level, transmitter. All models feature a three-stage phase sensitive amplifier that delivers a constant current across its entire bandwidth in direct connect, clamp or inductive modes. The Tx range is designed to deliver superior performance using minimal power consumption in a light weight and well-balanced, format. Based on a fully digital platform, the family of Radiodetection transmitters has been to support the range of Radiodetection RD7100 and RD8100 cable, pipe and RF marker locators. The Tx-1 is a low power transmitter. The Tx-5 has a higher power capability and the Tx-10 has the highest power capability. The Tx-5 and Tx-10 feature Fault Find as standard. All models feature constant current across their entire bandwidth in either direct connect, clamp or inductive mode. The transmitters are light-weight (6lb / 2.9kg), well-balanced and IP54 rated to cope with demanding environmental conditions. Each model has a removable accessory tray and a weatherproof battery compartment. A large, high contrast, backlit LCD screen provides the user with clear information.
Test Equipment has always been proud of being one of the most progressive specialist suppliers of test and measurement equipment. Australian owned and operated by experienced engineers, we offer extensive product and application knowledge as well as quality service, which translates into a seamless experience when you procure your test and measurement instruments from us.
We started as a small business, fueled by the knowledge that we could make a positive impact and have come a long way since our inception, growing a small range of products into a full range of hundreds of products from some of the most respected brands in the industry such as AEMC, FLIR Systems, Kyoritsu, Megger and Testrix Systems. We now cater for a massive number of clientele from all types of industries including electrical contractors, utility companies, engineering businesses and large corporations as well as a large number of local, and state government departments. We now serve the whole of Australia with various instrumentation including cable & pipe locators, drain, sewer & pipe inspection cameras, ground penetrating radar, thermal imaging equipment, power quality equipment and a whole range of industrial test instruments such as low resistance testers, insulation resistance testers and ground resistance testers.
At Test Equipment, we have a wide variety of payment options for ease of purchasing, including ZIP PAY, EFTPOS and bank deposit and we offer fast courier shipping to all parts of Australia because we understand that time is money.
Browse through our website, or search online for the product you need, or feel free to call us if you need any help or advice.