Shopping Cart

0 item $0.00

My Cart -

0 item

Radiodetection SuperCAT4+ Underground Cable & Pipe Locator Kit

Availability: In stock

Featuring the new Radiodetection SuperCAT4+, the Electrician's Kit is specifically designed for locating power lines and telecom cables. The kit includes a SuperCAT4+ locator, a T1-640/65 transmitter, a 100mm signal clamp, a live plug connector and a soft carry bag.  ...

Availability: In stock


Quoted figures are a guide only and subject to finance approval

Calculator 12 M 24 M 36 M 48 M
Monthly $503.66 $276.73 $202.06 $119.7
Weekly $116.32 $63.91 $46.66 $27.64

Featuring the new Radiodetection SuperCAT4+, the Electrician's Kit is specifically designed for locating power lines and telecom cables. The kit includes a SuperCAT4+ locator, a T1-640/65 transmitter, a 100mm signal clamp, a live plug connector and a soft carry bag.

The Electrician's Kit consists of the SuperCAT4+, which can utilise a comprehensive set of active frequencies, in order to detect and trace different cable types, in variety of environmental conditions. Featuring Dynamic Overload Protection, StrikeAlert and TruDepth technology, the SuperCAT4+ allows the user to accurately detect services in a safe and efficient manner. 

Built for on-site use, the SuperCAT4+ is designed with lightweight, ABS casing and is rated to IP54 for all-weather operation. The SuperCAT4+ features a high-contrast display with auto-backlight and bargraph, allowing the user to zone in on the buried service. In addition, the SuperCAT4+ is battery powered, has a loud speaker for audible warnings and is capable of sensitivity control.

The SuperCAT4+ can be operated using a simple mode selection, which can be chosen based on the signal type being located. The two main modes on the SuperCAT4+ are the power mode and the radio mode. As the name suggest, power mode is utilised to detect electromagnetic fields generated by loaded power cables. Power mode also features StrikeAlert, which warns the user of shallow buried utilities. Radio mode, on the other hand, is applied to detect long range radio signals, which can be radiated along dead or non-current carrying services such as buried metallic cables and pipes.  


                                                               SuperCAT4+ Overview                                                                         


As well as StrikeAlert, the SuperCAT4+ comes with a range of features, designed for safe work practices. One such feature is Dynamic Overload Protection filters, which enables the user to filter out high levels of electrical interference, as found around substations and near high-voltage transmission cables. TruDepth technology is also present on this model, which only indicates depth when the locator is oriented correctly above the target cable, pipe or sonde, and thus, aids in providing the most accurate depth reading. Real Sound  is another feature of this particular model, in which the audio signals emitted by the SuperCAT4+ are derived from the signals detected. Radio and Power Mode signals can be easily distinguished from each other and from background noise, helping to identify target utilities and differentiating between co-located utilities.  

The Electrician's Kit pairs the SuperCAT4+ with a Radiodetection T1-640/65 transmitter which features three active frequencies; 640Hz, 8kHz and 65kHz. The lower 640Hz frequency is ideal for locating lower resistance cables such as power lines, and the 8kHz frequency is ideal for general locating. The higher 65kHz frequency is optimized to find well insulated utilities such as twisted-pair telecom cables or insulated pipe joints, and is optimal for induction methods, such as the signal clamp, which is included in the kit. Also included in the kit is a live cable/plug connector which can utilised to send an active transmitter signal through a mains socket or power point. This is useful in situations where power cables may not be accessible directly, such as at street level.




Active Transmitter Methods



Key Features of SuperCAT4+:


  • Multiple frequency selection for power and telecom cables.
  • Power Mode for live, underground cables.
  • Radio Mode for dead services such as metallic pipes.
  • Strike Alert - warning of live, shallow services.
  • TruDepth - accurate depth measurement.
  • Dynamic Overload Protection for filtering interference.
  • Real Sound - audio signals are derived from the signals detected.
  • High contrast display with backlight and bargraph.
  • Battery operated receiver and transmitter.
  • Sensitivity control.



Specifications of SuperCAT4+:




Radiodetection SuperCAT4+ Locator

Radiodetection T1-640/65 transmitter

100mm signal clamp

Live plug connector

Soft carry bag

Calibration certificate

Download Attachment SuperCAT4+ Sheet (3.30 MB)

How do you rate this product?

  1 star 2 stars 3 stars 4 stars 5 stars

Write your own review

Test Equipment

Test Equipment has always been proud of being one of the most progressive specialist suppliers of test and measurement equipment. Australian owned and operated by experienced engineers, we offer extensive product and application knowledge as well as quality service, which translates into a seamless experience when you procure your test and measurement instruments from us.

We started as a small business, fueled by the knowledge that we could make a positive impact and have come a long way since our inception, growing a small range of products into a full range of hundreds of products from some of the most respected brands in the industry such as AEMC, FLIR Systems, Kyoritsu, Megger and Testrix Systems. We now cater for a massive number of clientele from all types of industries including electrical contractors, utility companies, engineering businesses and large corporations as well as a large number of local, and state government departments. We now serve the whole of Australia with various instrumentation including cable & pipe locators, drain, sewer & pipe inspection cameras, ground penetrating radar, thermal imaging equipment, power quality equipment and a whole range of industrial test instruments such as low resistance testers, insulation resistance testers and ground resistance testers.

At Test Equipment, we have a wide variety of payment options for ease of purchasing, including ZIP PAY, EFTPOS and bank deposit and we offer fast courier shipping to all parts of Australia because we understand that time is money.

Browse through our website, or search online for the product you need, or feel free to call us if you need any help or advice.

Popular Test Equipment