The CHEMIST 100 BE GREEN offers the latest generation of combustion / flue gas analyser in a compact and robust package. Aimed at the low cost market, the CHEMIST 100 BE GREEN does not compromise on quality or performance and is suitable for everyday use in combustion analysis. Up to 3 pre-calibrated field replaceable gas sensors (O2, CO, NO) can be fitted, the CHEMIST 100 BE GREEN is configured for measurement of O2 (0-21% volume), CO (0-4000ppm) and NO (0-5000ppm). The CO measuring cell also has a NOx filter, as gas sensors without NOx filtration tend to give falsely high CO readings due to the impact of NOx in the flue or exhaust.
A large back lit LCD display (50 x 50mm) gives instantaneous read outs and also offers a user friendly menu, which allows the device to be configured, the on board memory to be managed, and any diagnostic information to be displayed. The device is housed in a hard wearing instrument with a protective rubber boot, to protect it from damage in the field, and the magnetic back affords easy mounting when in use. The CHEMIST 100 BE GREEN is powered by a rechargeable Lithium Ion battery for up to 8 hours of continuous operation from a full charge.
CHEMIST 100 BE GREEN is equipped with a built in Bluetooth module which allows communication with a remote Bluetooth printer (up to 100 metres open field distance), which allows freedom of movement for thee user who does not have to be near the instrument for acquisition and analysis of data. Additionally an internal infrared interface is also built in to the device (HP-IR protocol) for communication with an IR printer.
One of the most unique functions of CHEMIST 100 BE GREEN is it's ability to generate a QR code, which can be scanned into the CHEMIST QR CODE app, allowing the analysis data and measurements to be downloaded. From here the downloaded data can be shared through an email, and sent as a CSV, PDF or XML file to a recipient.
The CHEMIST 100 BE GREEN is supplied as a kit with the instrument fitted with pre-calibrated and replaceable O2, CO and where applicable NO measurement cells, a 180mm flue gas probe with 1.6m cable & water trap, power supply adapter, calibration certificate, user documentation and a hard transport case.
A number of kit options are available across the CHEMIST 100 BE GREEN range, with up to 3 gas measurement cells, and with the option of a printer.
- Easy to use and robust instrument
- Up to 3 field replaceable pre-calibrated gas sensors (O2, CO & NO)
- Intuitive user interface
- Extremely easy to use
- Bright, wide graphic display with bright back lighting
- Built in rechargeable Lithium-Ion battery
- USB, Bluetooth and IR communication ports
- Analysis in manual or automatic mode
- 15 fuel types (natural gas, LPG, gas oil, fuel oil, diesel oil, propane, biogas, coal, wood etc.) built in to the instrument
- On board memory capable of storing up to 5 complete analyses, their data and their averaging
- Generation and visualisation of a QR code allowing data to be downloaded to the CHEMIST QR code app (both Android & iOS)
O2, CO, NO, air temperature, gas pressure (up to 20kPa) in piping, or combustion chamber, checking of pressure switches CO environmental measurement (using an internal sensor) Draught Measurement
Stack leaks, combustion efficiency, CO2, NOx, excess air, poison index (CO/CO2 ratio)